stainless steel
-
0.15M (5-7/8″) LONG 6mm (1/4″) Dia. Threaded Rod
$4.20 Add to cartLeft-hand M4 Threaded Rod – Cut to any length
-
0.25M (9-7/8″) LONG 6mm (1/4″) Dia. Non-Threaded Rod
$4.90 Add to cartNon-Threaded Rod – Cut to any length
-
0.15M (5-7/8″) LONG 6mm (1/4″) Dia. Non-Threaded Rod
$3.80 Add to cartNon-Threaded Rod – Cut to any length
-
3/4″ Dia. x 2″ PROJECTING STANDOFF SUPPORT w/BASE – Stainless Steel (For 3/8″ thick panels/shelves)
$21.50 Add to cartMade of (#SS304) Stainless Steel with Brushed Finish. The base is threaded to accept M6 Stud-Cap or Bolt. *Good for Outdoor Use.
*Key Advice — These are threaded fittings and may require additional rotational torque when securing onto the wall to reach the desired orientation
-
3/4″ Dia. x 1-7/8″ PROJECTING STANDOFF SUPPORT – Stainless Steel (For 1/4″ thick panels/shelves)
$12.50 Add to cartMade of (#SS304) Stainless Steel with Brushed Finish. The base is threaded to accept M6 Stud-Cap or Bolt. *Good for Outdoor Use.
*Key Advice — These are threaded fittings and may require additional rotational torque when securing onto the wall to reach the desired orientation
-
3/4″ Dia. x 1-5/8″ PROJECTING STANDOFF SUPPORT – Stainless Steel (For 3/8″ thick panels/shelves)
$12.10 Add to cartMade of (#SS304) Stainless Steel with Brushed Finish. The base is threaded to accept M6 Stud-Cap or Bolt. *Good for Outdoor Use.
*Key Advice — These are threaded fittings and may require additional rotational torque when securing onto the wall to reach the desired orientation
-
3/4″ Dia. x 1-5/8″ PROJECTING STANDOFF SUPPORT – Stainless Steel (For 1/4″ thick panels/shelves)
$11.90 Add to cartMade of (#SS304) Stainless Steel with Brushed Finish. The base is threaded to accept M6 Stud-Cap or Bolt. *Good for Outdoor Use.
*Key Advice — These are threaded fittings and may require additional rotational torque when securing onto the wall to reach the desired orientation
-
SUPPORT w/SCREW-CAP DOUBLE – For 6-7mm (15/64″-1/4″) thick panels with holes. (*Use with 10mm Stainless Rod System)
$16.90 Read moreUse for supporting signs, graphic panels, and decorative screens 6-7mm (15/64”-1/4″) thick. Panel hole size diameter 7mm (1/4″). Use with 10mm (3/8″) Dia. Rod Suspensions in Stainless Steel Finish. *Supports for thicker panels are also available.
-
1.5mm Cable with Top-Crimp – 8M (26′-2″) Long (*Stainless Steel)
$23.80 Read moreUse as cable replacement for overhead or ceiling-to-floor cable fixing kits.
-
1.5mm Cable with Top-Crimp – 4M (13′ 1-1/2″) Long (*Stainless Steel)
$15.90 Read moreUse as cable replacement for overhead or ceiling-to-floor cable fixing kits.
-
3mm Cable with Top-Crimp – 4.0M (13′ 1-1/2″) Long (*Stainless Steel)
$19.80 Add to cartUse as cable replacement for overhead or ceiling-to-floor cable fixing kits.
-
WALL-TO-WALL FIXING KIT with 10mm Rod and End Caps (Short Projection) – 1.5M (4′ 11-1/16”) Length
$71.70 Add to cartWall-to-Wall Rod Fixing Kit – Includes two RWF-10-25/SS Wall Fixings (2 ea), RD10-1.5M 10mm (3/8″) diameter threaded rod (1 ea), and REC-10/SS Decorative End Caps (2 ea). Use with wall-to-wall suspended applications. Supported rods project from wall 16mm (5/8″) on center.
-
WALL-TO-WALL FIXING KIT with 10mm Rod (Short Projection) – 1.0M (3’ 3-3/8”) Length
$52.50 Add to cartWall-to-Wall Rod Fixing Kit – Includes two RWF-10-25/SS Wall Fixings and RD10-1.0M 10mm (3/8″) diameter threaded rod. Use with wall-to-wall suspended applications (finish ends or cut rod to size). Supported rods project from wall 16mm (5/8″) on center.
-
CEILING-TO-FLOOR ADJUSTABLE ROD FIXING KIT with 10mm Rods – 4.5M (14’ 9”) Length
$183.85 Add to cartCeiling-to-Floor Adjustable Fixing Kit with 10mm Rods – Includes KCB-38 38mm Diameter Angle Base Support with Ball-Joint Swivel Coupling for Ceiling (1 ea), PSM-Collar Ring (1 ea), RCF-10/SS Top/Bottom Fixings with Spring Tensioner (1 ea), and RD10-1.5M 10mm (3/8″) diameter threaded rods (3 ea). Use with sloped ceiling-to-floor suspended applications — Join to 4.5M (14’ 9”) total height and cut to size on-site during installation. Use with Optional Base Support in 50mm diameter.
-
TOP/CEILING ADJUSTABLE FIXING KIT with 10mm Rod – 1.5M (4′ 11-1/16”) Length
$86.10 Add to cartTop/Ceiling Adjustable Fixing Kit with 10mm Rods – Includes KCB-38 38mm Diameter Angle Base Support with Ball-Joint Swivel Coupling (1 ea), PSM-Collar Ring (1 ea), RC-10/SS Top Fixing (1 ea), RD10-1.5M 10mm (3/8″) diameter threaded rod (1 ea), and REC-10/SS decorative end cap (1 ea). Use with sloped ceiling or angled wall suspended applications. Optional Base Support 50mm diameters are available.
-
50mm (2″) Dia. Base Support with Ball-Joint Swivel Coupling for Cables *Stainless Steel*
$38.60 Add to cartOptional Top/Bottom Base Support with Adjustable Angle Coupling for use with 1.5mm and 3mm diameter cable suspension sets (C100-2M/SS, C101-4M/SS, and C301-4M/SS). *Use for cable fixing sets in stainless steel finish only.
-
Cable Suspended 3/8″ Thick Acrylic Shelf Display Bundle w/Clear Slotted / Removable Wide Shelves (*Stainless Steel)
Price range: $901.20 through $993.60 Select options This product has multiple variants. The options may be chosen on the product pageCable Suspended 3/8″ clear acrylic shelves with laser-cut polished edges, drilled and slotted for easy removal. Use to display collectibles, promotional products, or lightweight merchandise. / 4 PCS SET
*Acrylic Shelves are Made-to-Order (MTO) – All sales final, no returns, no exchanges. Please read our WebStore “Terms & Conditions Policy“.
-
SUPPORT SINGLE LONG for 10mm Rod (*Use with 3mm Stainless Cables)
$7.80 Read moreUse with 3mm Cable Hanging System in stainless steel finish to support fabrics, banners, signs, shelves, or lightweight clothing/garments on horizontal rods. *Rods can be cut to size / not included.
-
SUPPORT SINGLE for P07/SS Boss (*Use with 3mm Stainless Cables)
$4.69 Read moreUse with 3mm Cable Hanging System in stainless steel finish to support wood panels and shelves, display cases, or clothing/hanging rails.
