Natural Stainless
-
TOP/CEILING FIXING KIT with 10mm Rod – 0.5M (1′ 7-11/16”) Length
$32.60 Add to cartTop/Ceiling Fixing Kit with 10mm Rods – Includes RC-10/SS Top Fixing (1 ea) and RD10-0.5M/R 10mm (3/8″) diameter threaded rod with dome end (1 ea). Use for ceiling suspensions or wall projecting installations. Optional Base Supports in 25mm, 38mm or 50mm diameters are available.
-
3/4″ Dia. x 2″ PROJECTING STANDOFF SUPPORT w/BASE – Stainless Steel (For 1/4″ thick panels/shelves)
$21.30 Add to cartMade of (#SS304) Stainless Steel with Brushed Finish. The base is threaded to accept M6 Stud-Cap or Bolt. *Good for Outdoor Use.
*Key Advice — These are threaded fittings and may require additional rotational torque when securing onto the wall to reach the desired orientation
-
3/4″ Dia. x 1-7/8″ PROJECTING STANDOFF SUPPORT – Stainless Steel (For 3/8″ thick panels/shelves)
$12.70 Add to cartMade of (#SS304) Stainless Steel with Brushed Finish. The base is threaded to accept M6 Stud-Cap or Bolt. *Good for Outdoor Use.
*Key Advice — These are threaded fittings and may require additional rotational torque when securing onto the wall to reach the desired orientation
-
38mm (1-1/2″) Dia. Base Support with Ball-Joint Swivel Coupling for Cables *Stainless Steel*
$27.80 Add to cartOptional Top/Bottom Base Support with Adjustable Angle Coupling for use with 1.5mm and 3mm diameter cable suspension sets (C100-2M/SS, C101-4M/SS, and C301-4M/SS). *Use for cable fixing sets in stainless steel finish only.
-
3mm Cable Suspension Kit with Adjustable Angle Top/Bottom Fixings – 4.0M (13′ 1-1/2″) Long (*Stainless Steel)
$89.60 Add to cartCable Suspension Kit includes: Cable, Spring Tensioner and Adjustable Top/Bottom Fixings with 38mm (1-1/2″) Dia. Bases – Optional Base Supports in 50mm diameter are also available. Cable Projection from Wall – 65mm (2-1/2″).
-
1.5mm Cable Suspension Kit with Adjustable Angle Top and Standard Floor Fixings – 4.0M (13′ 1-1/2″) Long (*Stainless Steel)
$65.20 Add to cartCable Suspension Kit includes: Cable, Spring Tensioner and Adjustable Angle Top Fixing with 38mm (1-1/2″) Dia. Bases – Optional Base Supports in 50mm diameter are also available. Cable Projection from Wall – 65mm (2-1/2″).
-
SUPPORT w/SCREW-CAP – For 10mm (3/8″) thick panels with holes. (*Use with 10mm Stainless Rod System)
$10.40 Add to cartUse for supporting signs, graphic panels, and decorative screens up to 10mm (3/8″) thick. Panel hole size diameter 7mm (1/4″). Use with 10mm (3/8″) Dia. Rod Suspensions in Stainless Steel Finish.
-
Panoramic Acrylic Frame – Poster Display Kit #KASP-210 / Clear Front
Price range: $76.14 through $137.04 Select options This product has multiple variants. The options may be chosen on the product pagePanoramic Acrylic Poster Frames with Standoffs – set of 1/4″ and 1/8″ Clear Acrylic Panels with Laser-Cut Polished Edges.
Available in a few standard insert sizes with an aspect ratio of 2:1, 3:1, or 4:1Use for displaying panoramic / wide format posters, graphics, or other interchangeable printed inserts. Provides a quick and easy way to change information. Standoff wall mounts and hardware are included.
- Supplied with 6mm (1/4”) thick clear back piece and 3mm (1/8”) thick clear acrylic front.
- Poster/graphic insert size should be proportionally smaller to allow for at less 1-1/2” clear border on all sides.
- Use with inserts up to 80 pt, or 2 mm (3/32″) thick.
- Panels are drilled for M6 studs. *Select standoff support’s finish type from the selection provided below.
- Optional graphic inserts printed on satin polyester base film are available – follow the links on “Add-ons Tab” below.
DELUXE NON-GLARE OPTION: These frames are also available with 1/8″ non-glare front Poster Display Kit #KASP-215
*Acrylic Frames are Made-to-Order (MTO) – All sales are final, no returns, no exchanges. Please read our WebStore “Terms & Conditions Policy“.
-
Cable Suspended 3/8″ Thick Acrylic Shelf Display Bundle w/Clear Slotted / Removable Shelves (*Stainless Steel)
Price range: $539.20 through $724.00 Select options This product has multiple variants. The options may be chosen on the product pageCable Suspended 3/8″ clear acrylic shelves with laser-cut polished edges, drilled and slotted for easy removal. Use to display collectibles, promotional products, or lightweight merchandise. / 4 PCS SET
*Acrylic Shelves are Made-to-Order (MTO) – All sales final, no returns, no exchanges. Please read our WebStore “Terms & Conditions Policy“.
-
Panoramic Acrylic Frame – Poster Display Kit #KASP-220 / Clear Front
Price range: $147.30 through $290.89 Select options This product has multiple variants. The options may be chosen on the product pagePanoramic Acrylic Poster Frames with Standoffs – set of 1/4″ and 1/8″ Clear Acrylic Panels with Laser-Cut Polished Edges.
Available in a few standard insert sizes with an aspect ratio of 3:1Use for displaying panoramic / wide format posters, graphics, or other interchangeable printed inserts. Provides a quick and easy way to change information. Standoff wall mounts and hardware are included.
- Supplied with 6mm (1/4”) thick clear back piece and 3mm (1/8”) thick clear acrylic front.
- Poster/graphic insert size should be proportionally smaller to allow for at less 1-1/2” clear border on all sides.
- Use with inserts up to 80 pt, or 2 mm (3/32″) thick.
- Panels are drilled for M6 studs. *Select standoff support’s finish type from the selection provided below.
- Optional graphic inserts printed on satin polyester base film are available – follow the links on “Add-ons Tab” below.
DELUXE NON-GLARE OPTION: These frames are also available with 1/8″ non-glare front Poster Display Kit #KASP-225
*Acrylic Frames are Made-to-Order (MTO) – All sales are final, no returns, no exchanges. Please read our WebStore “Terms & Conditions Policy“.
-
SUPPORT DOUBLE for P07/SS Boss (*Use with 10mm Stainless Rod System)
$9.80 Add to cartUse with 10mm Rod Suspension System in stainless steel finish to support wood panels and shelves, display cases, or clothing/hanging rails.
-
Panoramic Acrylic Frame – Poster Display Kit #KASP-225 / Non-Glare Front
Price range: $174.72 through $350.18 Select options This product has multiple variants. The options may be chosen on the product pagePanoramic Acrylic Poster Frames with Standoffs – set of 1/4″ Clear and 1/8″ Non-Glare Acrylic Panels with Laser-Cut Polished Edges.
Available in a few standard insert sizes with an aspect ratio of 3:1Use for displaying panoramic / wide format posters, graphics, or other interchangeable printed inserts. Provides a quick and easy way to change information. Standoff wall mounts and hardware are included.
- Supplied with 6mm (1/4”) thick clear back piece and 3mm (1/8”) thick non-glare acrylic front.
- Non-glare (non-reflective) acrylic front cover helps to reduce the glare and provides protection against harmful UV rays.
- Poster/graphic insert size should be proportionally smaller to allow for at less 1-1/2” clear border on all sides.
- Use with inserts up to 80 pt, or 2 mm (3/32″) thick.
- Panels are drilled for M6 studs. *Select standoff support’s finish type from the selection provided below.
- Optional graphic inserts printed on satin polyester base film are available – follow the links on “Add-ons Tab” below.
ECONOMY OPTION: These frames are also available with 1/8″ clear front Poster Display Kit #KASP-220
*Acrylic Frames are Made-to-Order (MTO) – All sales are final, no returns, no exchanges. Please read our WebStore “Terms & Conditions Policy“.
-
1″ DIA. x 1″ SIGN STANDOFF – Stainless Steel #304
Original price was: $7.40.$6.29Current price is: $6.29. Add to cartMade of Solid Stainless Steel #SS304 with a Satin Brushed Finish. Includes M10 Stud-Cap and Standoff Spacer/Barrel. *Suitable for both indoor and outdoor applications.
-
3/4″ DIA. x 3/4″ SIGN STANDOFF – Stainless Steel #304
Original price was: $6.50.$5.53Current price is: $5.53. Add to cartMade of Solid Stainless Steel #SS304 with a Satin Brushed Finish. Includes M10 Stud-Cap and Standoff Spacer/Barrel. *Suitable for both indoor and outdoor applications.
