Totem Display Stand / Free-Standing Display Kit #KFRS-017
$320.40 – $524.11
Totem Display Stand / RS Series comes with rods, support fittings, oval floor base, and 14″x22″ poster arched panel / portrait format single or double-sided.
Product Description
Totem Display Stand / RS Series comes with rods, support fittings, oval base and 14″x22″ Clear Acrylic Arched Panel and Non-Glare Arched Panel portrait format Single-Sided or Double-Sided.
FIXING TYPE:
Floor Standing (10mm Dia. Stainless Steel Rods w/Oval Floor Base)
HARDWARE:
RS-10 – Rod Support (2 ea)
R1500-10 – 1.0m Long Rod (2 ea)
REC-10 – End Cap for Rod (2 ea)
RS13-10 – Panel Support Single (4 ea)
RS23-10 – Panel Support Single (4 ea)*
ACS-625 OVAL 20 – 20″ x 8″ Oval Floor Base (1 ea)
P12BS – Screw Set for Base (2 ea)
ACCESSORIES:
18ASP-2CR-1422/RS – Clear Acrylic Panel (1 or 2* ea)
18ASP-2CR-1422NG/RS – Non-Glare Panel (1 or 2* ea) – Insert Size: 14”W x 22”H
* Used for Double-Sided Kits
AVAILABILITY: 3-7 Bus. Days (Fabrication and Delivery Time)
FINISHES: Stand supporting rods come in brushed stainless steel finish. The support components come in a satin chrome finish as standard, other finishes on request. The floor bases come in silver vein/powder coat paint as standard. All accessories are made of high-quality clear acrylic.
CUSTOMIZATIONS: To customize your own Totem Display Stand / RS Series Kit, please send us a short description or graphical attachment. All custom orders are subject to a minimum order requirement, please contact our sales representatives for more information at 800-753-9688.
INSTALLATION NOTES: Assembly required.
* Most small orders are shipped via UPS Ground. Large orders or oversize items will be palletized and shipped via motor freight. Additional Freight & Handling Surcharge may apply. We suggest ordering a few units at once in order to save on shipping cost.
We offer Multiple Unit Discounts (Mix & Match). Call 800-753-9688 for details.
Cleaning & Handling of Acrylic Display Products
When caring for acrylic accessories, it’s crucial to avoid using incorrect cleaners, as they can cause harm. Never use cleaners containing ammonia, glass cleaners, or furniture polish such as Fantastik, Tilex, Windex, or Clorox, as they can damage your acrylic. Instead, use mild soap and water or products specifically recommended for cleaning acrylic, such as Novus or other Rated Anti-Static Cleaner and Polish for Plastics. When cleaning, use micro-fiber disposable low lint cloths designed for acrylic and other plastics, and avoid using a dry cloth or your hand. Using the wrong cleaner can lead to immediate or delayed damage, weakening structural joints and causing cracking. During installation, handle acrylic with care to prevent cracking.
Product Limitations
Acrylic is not as rigid as glass or metals. Large, flat acrylic sheets, if insufficiently supported, may deform permanently due to continuous loads or even their own weight. Acrylic sheet can be used at temperatures from -30°F (-34°C) up to +190°F (+88°C), depending on the application. It is recommended that temperatures not exceed 160°F (71°C) for continuous service, or 190°F (88°C) for short, intermittent use. Components should not be exposed to high heat sources such as high wattage incandescent lamps, unless the finished product is ventilated to permit the dissipation of heat. Acrylic sheet is a combustible thermoplastic. Precautions should be taken to protect this material from flames and high heat sources.
Acrylic/Plastic Cleaning Kit
Cleaner & Polisher — cleans and brightens acrylic and all hard plastic surfaces. Leaves a shiny polished surface that resists dust and fingerprints. Contains no abrasives or harsh chemicals. Cleans, glazes, and eliminates static charge all in one operation. Recommended for: Acrylic, Plexiglass, Lexan, Vinyl, Glass, and all hard plastics. Use disposable or reusable cleaning cloths.
Installations Instructions
How to Install KFRS-017 Totem Display Stand / RS Series ❯ DOWNLOAD THE PDF HERE.
