1/4″ SLOPING ACRYLIC SHELF – CLEAR. Size: 8″D x 18-3/8″W
$33.66
1/4″ Clear acrylic shelf with 1.25″ Front Lip – Polished edges.
Product Description
1/4″ Sloping Acrylic Shelf with 1.25″ Front Lip – Clear.
For use with cable/rod suspension systems. Ideal for angled presentation of printed material. Size: 8″D x 18-3/8″W
Attributes
| Shelf Size | |
|---|---|
| Width | |
| Load Limits | |
| Compatibility | |
| Weight | |
| Mounting Options | |
| Material Thickness | |
| Finish | |
| Availability |
Cleaning & Handling of Acrylic Display Products
When caring for acrylic accessories, it’s crucial to avoid using incorrect cleaners, as they can cause harm. Never use cleaners containing ammonia, glass cleaners, or furniture polish such as Fantastik, Tilex, Windex, or Clorox, as they can damage your acrylic. Instead, use mild soap and water or products specifically recommended for cleaning acrylic, such as Novus or other Rated Anti-Static Cleaner and Polish for Plastics. When cleaning, use micro-fiber disposable low lint cloths designed for acrylic and other plastics, and avoid using a dry cloth or your hand. Using the wrong cleaner can lead to immediate or delayed damage, weakening structural joints and causing cracking. During installation, handle acrylic with care to prevent cracking.
Product Limitations
Acrylic is not as rigid as glass or metals. Large, flat acrylic sheets, if insufficiently supported, may deform permanently due to continuous loads or even their own weight. Acrylic sheet can be used at temperatures from -30°F (-34°C) up to +190°F (+88°C), depending on the application. It is recommended that temperatures not exceed 160°F (71°C) for continuous service, or 190°F (88°C) for short, intermittent use. Components should not be exposed to high heat sources such as high wattage incandescent lamps, unless the finished product is ventilated to permit the dissipation of heat. Acrylic sheet is a combustible thermoplastic. Precautions should be taken to protect this material from flames and high heat sources.
Acrylic/Plastic Cleaning Kit
Cleaner & Polisher — cleans and brightens acrylic and all hard plastic surfaces. Leaves a shiny polished surface that resists dust and fingerprints. Contains no abrasives or harsh chemicals. Cleans, glazes, and eliminates static charge all in one operation. Recommended for: Acrylic, Plexiglass, Lexan, Vinyl, Glass, and all hard plastics. Use disposable or reusable cleaning cloths.
Composition and Materials:
All glass shelves used with our cable/rod display systems are tempered (toughened). This type of glass is intended for glass shelving, glass cabinets, partitions, graphic displays and other uses requiring superior strength and safety properties.
Strength & Safety:
Under pressure, tempered glass is approximately two or more times stronger than annealed glass. Tempered glass is also able to resist temperature differences (200°F – 300°F) which would cause annealed glass to crack. Fully tempered glass is used in many applications because of its safety characteristics. Safety comes from strength and from a unique fracture pattern. When fully tempered glass breaks the glass fractures into small, relatively harmless fragments which prevent major injuries. Applicable building codes should always be checked for specific information and requirements.
Colors / Finishes:
Our stock glass shelves are supplied in 5mm or 10mm thick clear glass sheets with polished flat or pencil type edges. Available in few standard sizes.
Handling & Limitations:
Before ordering or installing always check for “Permissible Loads for Tempered Glass Shelves”. Tempered glass should receive the same care as annealed glass. Unfortunately, familiarity with the greatly improved strength of tempered glass may mislead people to exert less care in handling it. Careless handling and improper installation sometimes produce edge damage. Delayed breakage can ensue when edge-damaged tempered glass is subjected to a moderate thermal of mechanical stress. Full penetration of the compression layer will likely produce instantaneous total fragmentation of tempered glass. Hence, tempered glass cannot be cut or modified following heat treatment.
