panel support
-
PANEL SUPPORT SINGLE – For panels up to 7mm (1/4″) thick. (Use with 1.5mm Cables)
Original price was: $5.90.$4.72Current price is: $4.72. Add to cartUse with 1.5mm Cable Hanging System to support acrylic pockets, signs and graphic panels from sides.
-
PANEL SUPPORT SINGLE – For panels up to 4mm (5/32″) thick. (Use with 1.5mm Cables)
Original price was: $3.90.$3.12Current price is: $3.12. Add to cartUse with 1.5mm Cable Hanging System to support acrylic pockets, signs and graphic panels from sides.
-
PANEL SUPPORT DOUBLE – For panels up to 4mm (5/32″) thick. (Use with 1.5mm Cables)
Original price was: $5.15.$4.12Current price is: $4.12. Add to cartUse with 1.5mm Cable Hanging System to support acrylic pockets, signs and graphic panels from sides.
-
1″ x 1″ ADJUSTABLE EDGE-GRIP STANDOFF – Stainless Steel
$7.25 Add to cartMade of Solid Stainless Steel #SS201 with a Satin Brushed Finish. Includes Edge-Grip Support and Standoff Base.
*Not recommended for outdoor use. These standoff supports are machined using stainless steel #SS201. For outdoor or other sensitive environments, please use stainless steel type 304 or 316 standoffs that have a higher corrosion resistance.
-
PANEL SUPPORT DOUBLE – For panels up to 7mm (1/4″) thick. (Use with 1.5mm Cables)
Original price was: $8.60.$7.31Current price is: $7.31. Add to cartUse with 1.5mm Cable Hanging System to support acrylic pockets, signs and graphic panels from sides.
-
TOP/BOTTOM SUPPORT SINGLE – For panels up to 7mm (1/4″) thick. (Use with 1.5mm Cables)
Original price was: $6.20.$5.58Current price is: $5.58. Add to cartIdeal for supporting acrylic pockets, signs and graphic panels from sides. For panels up to 7mm (1/4″) thick that are wider than the distance between cables. Use with 1.5mm (1/16″) Dia. Cables Suspensions.
IMPORTANT: Standard Set Screws (M6 x 0.7 x 6mm) included with CG09 supports can only hold 6-7mm (1/4″) thick substrates. For thiner material such as 3mm (1/8″) order replacement M6 x 0.7 x 10mm Set Screws w/Teflon Tip
-
3/4″ Dia. x 1-1/16″ PROJECTING STANDOFF SUPPORT – Satin Clear Anodized Aluminum (For 1/4″ thick panels/shelves)
$5.60 Add to cartMade of Aluminum with Satin Anodized Finish. Includes Standoff Support and Coupling Anchor.
-
PANEL SUPPORT SINGLE – For panels up to 7mm (1/4″) thick. (Use with 3mm Cables)
Original price was: $6.90.$6.21Current price is: $6.21. Add to cartUse with 3mm Cable Hanging System to support acrylic pockets, signs and graphic panels from sides.
-
3/4″ x 1-1/32″ EDGE-GRIP PANEL SUPPORT – Satin Chrome
$6.12 Add to cartMade of Solid Brass with Satin Chrome Finish. Includes Edge-Grip Support, Coupling Anchor and Front Cover Cap.
-
3/4″ x 3/4″ ADJUSTABLE EDGE-GRIP STANDOFF – Stainless Steel
$6.20 Add to cartMade of Solid Stainless Steel #SS201 with a Satin Brushed Finish. Includes Edge-Grip Support and Standoff Base.
*Not recommended for outdoor use. These standoff supports are machined using stainless steel #SS201. For outdoor or other sensitive environments, please use stainless steel type 304 or 316 standoffs that have a higher corrosion resistance.
-
PANEL SUPPORT SINGLE – For panels up to 10mm (3/8″) thick. (Use with 1.5mm Cables)
Original price was: $6.40.$5.76Current price is: $5.76. Add to cartUse with 1.5mm Cable Hanging System to support acrylic pockets, signs and graphic panels from sides.
-
5/8″ Dia. x 5/8″ PROJECTING STANDOFF SUPPORT – Satin Chrome (For 1/4″ thick panels/shelves)
$3.90 Add to cartMade of Solid Brass with Satin Chrome Finish.
-
3/4″ Dia. x 7/8″ PROJECTING STANDOFF SUPPORT – Satin Clear Anodized Aluminum (For 1/4″ thick panels/shelves)
Original price was: $5.20.$4.42Current price is: $4.42. Add to cartMade of Aluminum with Satin Anodized Finish. The base is threaded to accept M6 Stud-Cap or Bolt.
-
SUPPORT w/SCREW-CAP – For 6-7mm (15/64”-1/4″) thick panels with holes (*Use with 1.5mm Stainless Cables)
$4.95 Add to cartUse for supporting signs and graphic panels 6-7mm (15/64”-1/4″) thick. Panel hole size diameter 7mm (1/4″). Use with 1.5mm (1/16″) Diameter Cable Suspensions in Stainless Steel Finish.
-
5/8″ x 11/16″ ADJUSTABLE EDGE-GRIP STANDOFF – Stainless Steel
$4.95 Add to cartMade of Solid Stainless Steel #SS201 with a Satin Brushed Finish. Includes Edge-Grip Support and Standoff Base.
*Not recommended for outdoor use. These standoff supports are machined using stainless steel #SS201. For outdoor or other sensitive environments, please use stainless steel type 304 or 316 standoffs that have a higher corrosion resistance.
-
11/16″ x 1-1/4″ EDGE-GRIP PANEL SUPPORT – Satin Chrome
$6.40 Add to cartMade of Solid Brass with Satin Chrome Finish. Includes Edge-Grip Support, Standoff Base and Coupling Anchor.
-
SUPPORT w/SCREW-CAP – For 5-6mm (3/16″-15/64″) thick panels with holes (Use with 1.5mm Cables)
Original price was: $5.40.$4.59Current price is: $4.59. Add to cartUse for supporting signs and graphic panels 5-6mm (3/16″-15/64″) thick. Panel hole size diameter 6mm (15/64″). Use with 1.5mm (1/16″) Dia. Cables Suspensions.
-
VERTICAL SUPPORT SINGLE – For panels up to 7mm (1/4″) thick. (Use with 10mm Rods)
Original price was: $9.40.$8.46Current price is: $8.46. Add to cartFor panels up to 7mm (1/4″) thick. Use with10mm (3/8″) Dia. Rod Suspensions. Ideal for supporting acrylic pockets, signs and graphic panels from sides
-
PANEL SUPPORT SINGLE – For panels up to 12.7mm (1/2″) thick. (Use with 3mm Cables)
Original price was: $9.50.$8.08Current price is: $8.08. Add to cartUse with 3mm Cable Hanging System to support acrylic frames, signs and graphic panels from sides.
-
3/4″ Dia. x 7/8″ PROJECTING STANDOFF SUPPORT – Satin Clear Anodized Aluminum (For 3/8″ thick panels/shelves)
Original price was: $5.40.$4.86Current price is: $4.86. Add to cartMade of Aluminum with Satin Anodized Finish. The base is threaded to accept M6 Stud-Cap or Bolt.
