Satin Chrome
-
MULTI-POSITION TOP/BOTTOM SUPPORT SINGLE – For panels up to 7mm (1/4″) thick. (Use with 3mm Cables)
Original price was: $8.30.$7.47Current price is: $7.47. Add to cartIdeal for supporting signs and graphic panels. For panels up to 7mm (1/4″) thick. Use with panels wider than the distance between cables. Use with 3mm (1/8″) Dia. Cables Suspensions.
IMPORTANT: Standard Set Screws (M6 x 0.7 x 8mm) included with CG12-3 supports can hold 3mm (1/8″) to 6mm (1/4″) thick substrates. To accommodate thiner or thicker substrates order suitable replacement Set Screws w/Teflon Tip.
-
5/8″ Dia. x 1-3/16″ PROJECTING STANDOFF SUPPORT – Satin Chrome (For 1/4″ thick panels/shelves)
Original price was: $7.20.$6.48Current price is: $6.48. Add to cartMade of Solid Brass with Satin Chrome Finish. Includes Clamp Support, Standoff Base and Coupling Anchor.
-
SUPPORT w/SCREW-CAP – For 10mm (3/8″) thick panels with holes. (Use with 6mm Rods)
Original price was: $10.90.$9.81Current price is: $9.81. Add to cartUse for supporting signs and graphic panels 10mm (3/8″) thick. Panel hole size diameter 6mm (15/64″). Use with 6mm (1/4″) Dia. Rod Suspensions.
-
MULTI-POSITION SUPPORT SINGLE – For panels/shelves up to 10mm (3/8″) thick. (Use with 1.5mm Cables)
Original price was: $8.20.$7.38Current price is: $7.38. Add to cartUse for supporting glass shelves, sloped acrylic shelves or angled presentations. For panels/shelves up to 10mm (3/8″) thick. Adjustable to any angle. Can be locked into position. Use with 1.5mm (1/16″) Dia. Cables Suspensions.
-
MULTI-POSITION TOP/BOTTOM SUPPORT SINGLE – For panels up to 7mm (1/4″) thick. (Use with 10mm Rods)
Original price was: $8.90.$8.01Current price is: $8.01. Add to cartIdeal for supporting signs and graphic panels. For panels up to 7mm (1/4″) thick. Use with panels wider than the distance between cables. Use with 10mm (3/8″) Dia. Rod Suspensions.
IMPORTANT: Standard Set Screws (M6 x 0.7 x 8mm) included with RG12-10 supports can hold 3mm (1/8″) to 6mm (1/4″) thick substrates. To accommodate thiner or thicker substrates order suitable replacement Set Screws w/Teflon Tip.
-
FRONT MOUNT SUPPORT for 6mm Rod (Use with 1.5mm Cables)
Original price was: $6.90.$6.21Current price is: $6.21. Add to cartUse with 1.5mm Cable Hanging System to support hook-on acrylic holders, fabrics, banners or signs on horizontal rods.
-
SUPPORT w/SCREW-CAP – For 5-6mm (3/16″-15/64″) thick panels with holes (Use with 3mm Cables)
Original price was: $6.40.$5.44Current price is: $5.44. Add to cartUse for supporting signs and graphic panels 5-6mm (3/16″-15/64″) thick. Panel hole size diameter 6mm (15/64″). Use with 3mm (1/8″) Diameter Cable Suspensions.
-
SUPPORT FOR PANELS WITH HOLES SINGLE – For panels up to 5-6mm (3/16″-15/64″) thick. (Use with 10mm Rods)
Original price was: $9.60.$8.16Current price is: $8.16. Add to cartUse for supporting signs and graphic panels 5-6mm (3/16″-15/64″) thick. Panel hole size diameter 6mm (15/64″). Use with 10mm (3/8″) Dia. Rod Suspensions. *Supports for thicker panels are also available.
-
MULTI-POSITION TOP/BOTTOM SUPPORT SINGLE – For panels up to 7mm (1/4″) thick. (Use with 6mm Rods)
Original price was: $11.40.$10.26Current price is: $10.26. Add to cartIdeal for supporting signs and graphic panels. For panels up to 7mm (1/4″) thick. Use with panels wider than the distance between cables. Use with 6mm (1/4″) Dia. Rod Suspensions.
IMPORTANT: Standard Set Screws (M6 x 0.7 x 8mm) included with RG12 supports can hold 3mm (1/8″) to 6mm (1/4″) thick substrates. To accommodate thiner or thicker substrates order suitable replacement Set Screws w/Teflon Tip.
-
SUPPORT SINGLE for 6mm Rod (Use with 1.5mm Cables)
Original price was: $4.50.$4.05Current price is: $4.05. Add to cartUse with 1.5mm Cable Hanging System to support hook-on acrylic holders, fabrics, banners or signs on horizontal rods.
-
MULTI-POSITION SUPPORT SINGLE – For panels/shelves up to 10mm (3/8″) thick. (Use with 3mm Cables)
Original price was: $8.80.$7.92Current price is: $7.92. Add to cartUse for supporting glass shelves, sloped acrylic shelves or angled presentations. For panels/shelves up to 10mm (3/8″) thick. Adjustable to any angle. Can be locked into position. Use with 3mm (1/8″) Dia. Cables Suspensions.
-
Frameless Acrylic Frame – Poster Display Kit #KASP-015 / Non-Glare Front
$118.58 – $326.13 Select options This product has multiple variants. The options may be chosen on the product pageFrameless Acrylic Poster Frames with Standoffs – set of 1/4″ Clear and 1/8″ Non-Glare Acrylic Panels with Laser-Cut Polished Edges.
Available in following standard panel sizes: 18” x 18”, 18″ x 24″, 20″ x 30″, 22” x 28”, 24″ x 24”, 24″ x 36”, 28″ x 40”, 30″ x 30”, and 30″ x 40″.Use for displaying large posters, graphics, or other interchangeable printed inserts in either portrait or landscape orientation. Provides a quick and easy way to change information. Standoff wall mounts and hardware are included.
- Supplied with 6mm (1/4”) thick clear back piece and 3mm (1/8”) thick non-glare acrylic front.
- Non-glare (non-reflective) acrylic front cover helps to reduce the glare and provides protection against harmful UV rays.
- Poster/graphic insert size should be proportionally smaller to allow for at less 2” clear border on all sides.
- Use with inserts up to 80 pt, or 2 mm (3/32″) thick.
- Panels are drilled for M8-10 studs. *Select standoff support’s finish type from the selection provided below.
- Optional graphic inserts printed on satin polyester base film are available – follow the links on “Add-ons Tab” below.
ECONOMY OPTION: These frames are also available with 1/8″ clear front Poster Display Kit #KASP-010
*Acrylic Frames are Made-to-Order (MTO) – All sales are final, no returns, no exchanges. Please read our WebStore “Terms & Conditions Policy“.
-
MULTI-POSITION SUPPORT DOUBLE – For panels/shelves up to 10mm (3/8″) thick. (Use with 3mm Cables)
Original price was: $15.20.$13.68Current price is: $13.68. Add to cartUse for supporting glass shelves, sloped acrylic shelves or angled presentations. For panels/shelves up to 10mm (3/8″) thick. Adjustable to any angle. Can be locked into position. Use with 3mm (1/8″) Dia. Cables Suspensions.
-
11/16″ x 2-3/16″ EDGE-GRIP PANEL SUPPORT – Satin Chrome
Original price was: $7.60.$6.84Current price is: $6.84. Add to cartMade of Solid Brass with Satin Chrome Finish. Includes Edge-Grip Support, Standoff Base and Coupling Anchor.
-
1.5mm Double-Cable Assembly Suspension Kit with 150mm Wall Brackets and Floor Fixings – 3.0M (9′ 10″) Long
$172.80 Add to cartCable Suspension Set includes: Cables, Bottom Fixings, Spring Tensioners and Wall Brackets/Fixings with with 38mm (1-1/2″) Dia. Bases. Cable Projection from Wall – 38mm (1-1/2″). Back-to-Front Cable Distance – 150mm (5-7/8″). *Two Suspension kits are required for assembly of one shelf unit.
-
1.5mm Cable Suspension Kit with Heavy-Duty Toggle Fixings – 4.0M (13′ 1-1/2″) Long
Original price was: $33.40.$28.39Current price is: $28.39. Add to cartCable Suspension Kit includes: Top/Bottom Fixings with Quick-Fit Toggles for attachment to Rails/Tracks.
-
Cable Suspended Glass Shelving Kit #KSI-004
From: Original price was: $321.60.$300.24Current price is: $300.24. Select optionsSupplied with 1.5mm cable suspension hardware, shelf supports, and tempered glass shelves.
*Cable Suspension Kits with Acrylic Shelves are also available – #KSI-004PLEX.
-
1/2″ DIA. x 3/4″ BRASS SIGN STANDOFF – ECONOMY / SATIN CHROME
Original price was: $2.10.$1.26Current price is: $1.26. Add to cartMade of Solid Brass with Satin Chrome Finish. Includes M8 Stud-Cap and Standoff Spacer/Barrel.
-
SUPPORT SINGLE FOR 6mm ROD. (Use with 10mm Rods)
$5.60 Add to cartUse with 10mm (3/8″) Rod Suspension System to support hook-on acrylic holders, fabrics, banners or signs on horizontal rods.
-
SHELF SUPPORT DOUBLE – For shelves up to 7mm (1/4″) thick. (Use with 10mm Rods)
Original price was: $14.00.$12.60Current price is: $12.60. Add to cartIdeal for supporting acrylic and glass shelves up to 7mm (1/4″) thick. Use with 10mm (3/8″) Dia. Rod Suspensions.
