Oversized and Panoramic Acrylic Display Kits
-
Oversized Frameless Acrylic Frame – Poster Display Kit #KASP-320 / Clear Front
$378.15 – $648.29 Select options This product has multiple variants. The options may be chosen on the product pageFrameless Acrylic Poster Frames with Standoffs – set of 1/4″ and 1/8″ Clear Acrylic Panels with Laser-Cut Polished Edges.
Available in 36” x 52”, 40” x 52”, 40″ x 58″, 42” x 56”, 44″ x 64″, and 48″ x 72″ panel sizes.Use for displaying oversize posters, graphics, or other interchangeable printed inserts in either portrait or landscape orientation. Provides a quick and easy way to change information. Standoff wall mounts and hardware are included.
- Supplied with 6mm (1/4”) thick clear back piece and 3mm (1/8”) thick clear acrylic front.
- Poster/graphic insert size should be proportionally smaller to allow for at less 2” clear border on all sides.
- Use with inserts up to 80 pt, or 2 mm (3/32″) thick.
- Panels are drilled for M8-10 studs. *Select standoff support’s finish type from the selection provided below.
- Optional graphic inserts printed on satin polyester base film are available – follow the links on “Add-ons Tab” below.
- Minimal order requirement (MOQ) for this product is two (2) units.
DELUXE NON-GLARE OPTION: These frames are also available with 1/8″ non-glare front Poster Display Kit #KASP-325
*Acrylic Frames are Made-to-Order (MTO) – All sales are final, no returns, no exchanges. Please read our WebStore “Terms & Conditions Policy“.
-
Oversized Frameless Acrylic Frame – Poster Display Kit #KASP-325 / Non-Glare Front
$457.13 – $794.09 Select options This product has multiple variants. The options may be chosen on the product pageFrameless Acrylic Poster Frames with Standoffs – set of 1/4″ Clear and 1/8″ Non-Glare Acrylic Panels with Laser-Cut Polished Edges.
Available in 36” x 52”, 40” x 52”, 40″ x 58″, 42” x 56”, 44″ x 64″, and 48″ x 72″ panel sizes.Use for displaying oversize posters, graphics, or other interchangeable printed inserts in either portrait or landscape orientation. Provides a quick and easy way to change information. Standoff wall mounts and hardware are included.
- Supplied with 6mm (1/4”) thick clear back piece and 3mm (1/8”) thick non-glare acrylic front.
- Non-glare (non-reflective) acrylic front cover helps to reduce the glare and provides protection against harmful UV rays.
- Poster/graphic insert size should be proportionally smaller to allow for at less 2” clear border on all sides.
- Use with inserts up to 80 pt, or 2 mm (3/32″) thick.
- Panels are drilled for M8-10 studs. *Select standoff support’s finish type from the selection provided below.
- Optional graphic inserts printed on satin polyester base film are available – follow the links on “Add-ons Tab” below.
- Minimal order requirement (MOQ) for this product is two (2) units.
ECONOMY OPTION: These frames are also available with 1/8″ clear front Poster Display Kit #KASP-320
*Acrylic Frames are Made-to-Order (MTO) – All sales are final, no returns, no exchanges. Please read our WebStore “Terms & Conditions Policy“.
-
Panoramic Acrylic Frame – Poster Display Kit #KASP-210 / Clear Front
$76.14 – $137.04 Select options This product has multiple variants. The options may be chosen on the product pagePanoramic Acrylic Poster Frames with Standoffs – set of 1/4″ and 1/8″ Clear Acrylic Panels with Laser-Cut Polished Edges.
Available in a few standard insert sizes with an aspect ratio of 2:1, 3:1, or 4:1Use for displaying panoramic / wide format posters, graphics, or other interchangeable printed inserts. Provides a quick and easy way to change information. Standoff wall mounts and hardware are included.
- Supplied with 6mm (1/4”) thick clear back piece and 3mm (1/8”) thick clear acrylic front.
- Poster/graphic insert size should be proportionally smaller to allow for at less 1-1/2” clear border on all sides.
- Use with inserts up to 80 pt, or 2 mm (3/32″) thick.
- Panels are drilled for M6 studs. *Select standoff support’s finish type from the selection provided below.
- Optional graphic inserts printed on satin polyester base film are available – follow the links on “Add-ons Tab” below.
DELUXE NON-GLARE OPTION: These frames are also available with 1/8″ non-glare front Poster Display Kit #KASP-215
*Acrylic Frames are Made-to-Order (MTO) – All sales are final, no returns, no exchanges. Please read our WebStore “Terms & Conditions Policy“.
-
Panoramic Acrylic Frame – Poster Display Kit #KASP-220 / Clear Front
$147.30 – $290.89 Select options This product has multiple variants. The options may be chosen on the product pagePanoramic Acrylic Poster Frames with Standoffs – set of 1/4″ and 1/8″ Clear Acrylic Panels with Laser-Cut Polished Edges.
Available in a few standard insert sizes with an aspect ratio of 3:1Use for displaying panoramic / wide format posters, graphics, or other interchangeable printed inserts. Provides a quick and easy way to change information. Standoff wall mounts and hardware are included.
- Supplied with 6mm (1/4”) thick clear back piece and 3mm (1/8”) thick clear acrylic front.
- Poster/graphic insert size should be proportionally smaller to allow for at less 1-1/2” clear border on all sides.
- Use with inserts up to 80 pt, or 2 mm (3/32″) thick.
- Panels are drilled for M6 studs. *Select standoff support’s finish type from the selection provided below.
- Optional graphic inserts printed on satin polyester base film are available – follow the links on “Add-ons Tab” below.
DELUXE NON-GLARE OPTION: These frames are also available with 1/8″ non-glare front Poster Display Kit #KASP-225
*Acrylic Frames are Made-to-Order (MTO) – All sales are final, no returns, no exchanges. Please read our WebStore “Terms & Conditions Policy“.
-
Panoramic Acrylic Frame – Poster Display Kit #KASP-225 / Non-Glare Front
$174.72 – $350.18 Select options This product has multiple variants. The options may be chosen on the product pagePanoramic Acrylic Poster Frames with Standoffs – set of 1/4″ Clear and 1/8″ Non-Glare Acrylic Panels with Laser-Cut Polished Edges.
Available in a few standard insert sizes with an aspect ratio of 3:1Use for displaying panoramic / wide format posters, graphics, or other interchangeable printed inserts. Provides a quick and easy way to change information. Standoff wall mounts and hardware are included.
- Supplied with 6mm (1/4”) thick clear back piece and 3mm (1/8”) thick non-glare acrylic front.
- Non-glare (non-reflective) acrylic front cover helps to reduce the glare and provides protection against harmful UV rays.
- Poster/graphic insert size should be proportionally smaller to allow for at less 1-1/2” clear border on all sides.
- Use with inserts up to 80 pt, or 2 mm (3/32″) thick.
- Panels are drilled for M6 studs. *Select standoff support’s finish type from the selection provided below.
- Optional graphic inserts printed on satin polyester base film are available – follow the links on “Add-ons Tab” below.
ECONOMY OPTION: These frames are also available with 1/8″ clear front Poster Display Kit #KASP-220
*Acrylic Frames are Made-to-Order (MTO) – All sales are final, no returns, no exchanges. Please read our WebStore “Terms & Conditions Policy“.
-
Oversized Frameless Acrylic Frame – Poster Display Kit #KASP-420 / Clear Front
$660.39 – $838.10 Select options This product has multiple variants. The options may be chosen on the product pageFrameless Acrylic Poster Frames with Standoffs – set of 1/4″ and 1/8″ Clear Acrylic Panels with Laser-Cut Polished Edges.
Available in 42” x 84” and 48″ x 96″ panel sizes.Use for displaying extra-large/oversize photographs, graphics, maps, or other interchangeable printed inserts in either portrait or landscape orientation. Provides a quick and easy way to change information. Standoff wall mounts and hardware are included.
- Supplied with 6mm (1/4”) thick clear back piece and 3mm (1/8”) thick non-glare acrylic front.
- Graphic/print insert size should be proportionally smaller to allow for at less 2” clear border on all sides.
- Use with inserts up to 80 pt, or 2 mm (3/32″) thick.
- Panels are drilled for M8-10 studs. *Select standoff support’s finish type from the selection provided below.
- Optional graphic inserts printed on satin polyester base film are available – follow the links on “Add-ons Tab” below.
- Minimal order requirement (MOQ) for this product is two (2) units.
DELUXE NON-GLARE OPTION: These frames are also available with 1/8″ non-glare front Poster Display Kit #KASP-425
*Acrylic Frames are Made-to-Order (MTO) – All sales are final, no returns, no exchanges. Please read our WebStore “Terms & Conditions Policy“.
-
Oversized Frameless Acrylic Frame – Poster Display Kit #KASP-425 / Non-Glare Front
$800.70 – $1,021.70 Select options This product has multiple variants. The options may be chosen on the product pageFrameless Acrylic Poster Frames with Standoffs – set of 1/4″ Clear and 1/8″ Non-Glare Acrylic Panels with Laser-Cut Polished Edges.
Available in 42” x 84” and 48″ x 96″ panel sizes.Use for displaying extra-large/oversize photographs, graphics, maps, or other interchangeable printed inserts in either portrait or landscape orientation. Provides a quick and easy way to change information. Standoff wall mounts and hardware are included.
- Supplied with 6mm (1/4”) thick clear back piece and 3mm (1/8”) thick non-glare acrylic front.
- Non-glare (non-reflective) acrylic front cover helps to reduce the glare and provides protection against harmful UV rays.
- Graphic/print insert size should be proportionally smaller to allow for at less 2” clear border on all sides.
- Use with inserts up to 80 pt, or 2 mm (3/32″) thick.
- Panels are drilled for M8-10 studs. *Select standoff support’s finish type from the selection provided below.
- Optional graphic inserts printed on satin polyester base film are available – follow the links on “Add-ons Tab” below.
- Minimal order requirement (MOQ) for this product is two (2) units.
ECONOMY OPTION: These frames are also available with 1/8″ clear front Poster Display Kit #KASP-420
*Acrylic Frames are Made-to-Order (MTO) – All sales are final, no returns, no exchanges. Please read our WebStore “Terms & Conditions Policy“.
-
Panoramic Acrylic Frame – Poster Display Kit #KASP-215 / Non-Glare Front
$90.06 – $164.46 Select options This product has multiple variants. The options may be chosen on the product pagePanoramic Acrylic Poster Frames with Standoffs – set of 1/4″ Clear and 1/8″ Non-Glare Acrylic Panels with Laser-Cut Polished Edges.
Available in a few standard insert sizes with an aspect ratio of 2:1, 3:1, or 4:1Use for displaying panoramic / wide format posters, graphics, or other interchangeable printed inserts. Provides a quick and easy way to change information. Standoff wall mounts and hardware are included.
- Supplied with 6mm (1/4”) thick clear back piece and 3mm (1/8”) thick non-glare acrylic front.
- Non-glare (non-reflective) acrylic front cover helps to reduce the glare and provides protection against harmful UV rays.
- Poster/graphic insert size should be proportionally smaller to allow for at less 1-1/2” clear border on all sides.
- Use with inserts up to 80 pt, or 2 mm (3/32″) thick.
- Panels are drilled for M6 studs. *Select standoff support’s finish type from the selection provided below.
- Optional graphic inserts printed on satin polyester base film are available – follow the links on “Add-ons Tab” below.
ECONOMY OPTION: These frames are also available with 1/8″ clear front Poster Display Kit #KASP-210
*Acrylic Frames are Made-to-Order (MTO) – All sales are final, no returns, no exchanges. Please read our WebStore “Terms & Conditions Policy“.
-
Oversize Acrylic Poster Frames with Standoffs– PRODUCT BUNDLES. Frame Sizes: 36″ x 48″ – 48″ x 72″
Select OptionsAcrylic Poster Frame/Standoff Hardware Bundle: Includes 1/4″ Clear Acrylic Back Panel (4 ea), 1/8″ Non-Glare Acrylic Front Panel (4 ea), and Stainless Steel Standoff/Drywall Anchor Hardware (24 ea). Use for displaying posters or other interchangeable printed inserts in either portrait or landscape orientation. Provides a quick and easy way to change information. Available Panel Size: 36″ x 48″, 42″ x 56″, and 48″ x 72″.
