Home ❯ Use with 1.5mm (1/16") Dia. Cables to Suspend Signs and Graphic Panels.
Use with 1.5mm (1/16") Dia. Cables to Suspend Signs and Graphic Panels.
Showing all 11 results
-
TOP/BOTTOM SUPPORT SINGLE – For panels up to 7mm (1/4″) thick. (Use with 1.5mm Cables)
$6.20Original price was: $6.20.$5.58Current price is: $5.58. Add to cartIdeal for supporting acrylic pockets, signs and graphic panels from sides. For panels up to 7mm (1/4″) thick that are wider than the distance between cables. Use with 1.5mm (1/16″) Dia. Cables Suspensions.
IMPORTANT: Standard Set Screws (M6 x 0.7 x 6mm) included with CG09 supports can only hold 6-7mm (1/4″) thick substrates. For thiner material such as 3mm (1/8″) order replacement M6 x 0.7 x 10mm Set Screws w/Teflon Tip
-
SUPPORT w/SCREW-CAP – For 5-6mm (3/16″-15/64″) thick panels with holes (Use with 1.5mm Cables)
$5.40Original price was: $5.40.$4.59Current price is: $4.59. Add to cartUse for supporting signs and graphic panels 5-6mm (3/16″-15/64″) thick. Panel hole size diameter 6mm (15/64″). Use with 1.5mm (1/16″) Dia. Cables Suspensions.
-
PANEL SUPPORT SINGLE – For panels up to 12.7mm (1/2″) thick. (Use with 1.5mm Cables)
$7.90Original price was: $7.90.$6.72Current price is: $6.72. Add to cartUse with 1.5mm Cable Hanging System to support acrylic frames, signs and graphic panels from sides.
-
SUPPORT w/SCREW-CAP – For 10mm (3/8″) thick panels with holes (Use with 1.5mm Cables)
$7.80Original price was: $7.80.$7.02Current price is: $7.02. Add to cartUse for supporting signs and graphic panels 10mm (3/8″) thick. Panel hole size diameter 6mm (15/64″). Use with 1.5mm (1/16″) Dia. Cables Suspensions.
-
SUPPORT FOR PANELS WITH HOLES DOUBLE – For 10mm (3/8″) thick panels. (Use with 1.5mm Cables)
$12.20Original price was: $12.20.$10.98Current price is: $10.98. Add to cartUse for supporting signs and graphic panels 10mm (3/8″) thick panels. Panel hole size diameter 6mm (15/64″). Use with 1.5mm (1/16″) Dia. Cables Suspensions.
-
MULTI-POSITION TOP/BOTTOM SUPPORT SINGLE – For panels up to 7mm (1/4″) thick. (Use with 1.5mm Cables)
$7.80Original price was: $7.80.$7.02Current price is: $7.02. Add to cartIdeal for supporting signs and graphic panels. For panels up to 7mm (1/4″) thick. Use with panels wider than the distance between cables. Use with 1.5mm (1/16″) Dia. Cables Suspensions.
IMPORTANT: Standard Set Screws (M6 x 0.7 x 8mm) included with CG12 supports can hold 3mm (1/8″) to 6mm (1/4″) thick substrates. To accommodate thiner or thicker substrates order suitable replacement Set Screws w/Teflon Tip.
-
SUPPORT w/SCREW-CAP – For 12.7mm (1/2″) thick panels with holes (Use with 1.5mm Cables)
$8.20Original price was: $8.20.$7.38Current price is: $7.38. Add to cartUse for supporting signs and graphic panels 12.7mm (1/2″) thick. Panel hole size diameter 6mm (15/64″). Use with 1.5mm (1/16″) Dia. Cables Suspensions.
-
SUPPORT FOR PANELS WITH HOLES DOUBLE – For panels up to 5-6mm (3/16″-15/64″) thick. (Use with 1.5mm Cables)
$9.60Original price was: $9.60.$8.64Current price is: $8.64. Add to cartUse for supporting signs and graphic panels 5-6mm (3/16″-15/64″) thick. Panel hole size diameter 6mm (15/64″). Use with 1.5mm (1/16″) Dia. Cables Suspensions. *Supports for thicker panels are also available.
-
SUPPORT w/SCREW-CAP – For 6mm (15/64″) thick panels with holes (Use with 1.5mm Cables)
$5.40Original price was: $5.40.$4.05Current price is: $4.05. Add to cartIdeal for supporting signs and graphic panels
-
PANEL SUPPORT SINGLE – For panels up to 12.7mm (1/2″) thick (Use with 1.5mm Cables)
$9.50Original price was: $9.50.$6.65Current price is: $6.65. Add to cartUse with 1.5mm Cable Hanging System to support acrylic pockets, signs and graphic panels from sides.
-
MULTI-POSITION TOP/BOTTOM SUPPORT DOUBLE – For panels up to 7mm (1/4″) thick. (Use with 1.5mm Cables)
$13.20Original price was: $13.20.$11.88Current price is: $11.88. Add to cartIdeal for supporting signs and graphic panels. For panels up to 7mm (1/4″) thick. Use with panels wider than the distance between cables. Use with 1.5mm (1/16″) Dia. Cables Suspensions.
IMPORTANT: Standard Set Screws (M6 x 0.7 x 8mm) included with CG12 supports can hold 3mm (1/8″) to 6mm (1/4″) thick substrates. To accommodate thiner or thicker substrates order suitable replacement Set Screws w/Teflon Tip.
SEARCH BY KEYWORD/SKU
STORE CATEGORIES
- Specials & Promo Discounts
- ★ Clearance & Overstock Items
- Wall Display Ideas | Products
- Wall Displays | Project Details & Downloads
- Product Bundles | Bulk Savings
- Display Solutions & Design Ideas
- Display Systems & Installation Accessories
- Cable Display Systems
- Rod Display Systems
- Rail/Track Display Systems
- Sign & Panel Support Systems
- Aluminum Modular Display Systems
- Accessories for Cable/Rod & Rail
- Acrylic Products
- Signware Products & Accessories
- Hardware & Miscellaneous
- Other Products & Services